APTUS® Shoulder
Made for support.
APTUS® Shoulder
The shoulder is the most flexible joint in the human body and therefore is susceptible to injury. Fractures in the shoulder girdle belong to the most common fractures.
With the APTUS Shoulder portfolio, Medartis offers a versatile and anatomical solution to treat fractures, osteotomies and non-unions of the proximal humerus and the clavicle. The Proximal Humerus System 3.5 addresses the challenge of reaching a stable support in the calcar region to avoid the risk of loss of reduction. The Clavicle System 2.8 focuses on stability especially in lateral fractures.
Both systems feature a range of anatomically shaped plates to fit the individual anatomy. All of the implants take advantage of Medartis' innovative TriLock locking technology providing multidirectional angular stability.
PRODUCTS
SpeedTip Cannulated Screws
CCS 1.7, 2.2, 3.0, 4.0, 5.0, 7.0
Self-drilling and self-tapping cannulated screws with SpeedTip polygonal geometry, precise and sharp thread, and optimized cutting tip
TriLock Distal Fibula Plates 2.8, Straight
APTUS Ankle 2.8/3.5
1.6 mm plate profile for soft tissue protection and offset screw geometry in the shaft to reduce screw collision in narrow bones.
TriLock Distal Fibula Plates 2.8/3.5, Lateral
APTUS Ankle 2.8/3.5
The anatomic plates have a combination of 2.8 and 3.5 mm screws and allow for the capture of small comminuted fractures in the head while still having the required strength in the shaft.
TriLock Distal Tibia Plates 2.8/3.5, Medial
APTUS Ankle 2.8/3.5
Multiple holes in the head of the plate accept 2.8 mm and 3.5 mm TriLock and cortical screws which gives the option to use small or large screws in bone fragments
TriLock Distal Tibia Plates 2.8/3.5, Anterolateral
APTUS Ankle 2.8/3.5
Seven screw hole options in the metaphyseal section for 2.8 mm and 3.5 mm TriLock or cortical screws and an oblong hole allows for adjustment of the plate position before final fixation
TriLock Distal Tibia Plates 3.5, T and L
APTUS Ankle 2.8/3.5
Reconstruction plate design between holes which can be bent 3D
3.5 TriLock Straight Plates
APTUS Ankle 2.8/3.5
2.2 mm plate profile for soft tissue protection and offset screw geometry in the shaft to reduce screw collision in narrow bones.
SpeedTip CCS and headed CCS 4.0/5.0/7.0
Self-drilling and self-tapping cannulated screws with SpeedTip polygonal geometry, precise and sharp thread, and optimized cutting tip
SpeedTip headed Cannulated Screws
headedCCS 2.2, 3.0, 4.0, 5.0, 7.0
Self-drilling and self-tapping cannulated screws with SpeedTip polygonal geometry, precise and sharp thread, and optimized cutting tip
TriLock Radius and Ulna Shaft Plates 2.8
Radius and Ulna Shaft System 2.8
Radius and Ulna shaft plates for anatomical treatment of forearm fractures
TriLock MTP-1 Revision Plates 2.8
Hallux System 2.8
MTP-1 Revision Plates
Stability and flexibility for complex revisions
TriLock TMT-1 Medial Fusion Plates 2.8
Hallux System 2.8
TMT-1 Medial Fusion Plate
Less tendon contact in classic or modified Lapidus arthrodesis
TRILOCK GRID PLATES 2.0/2.3
Fore- and Midfoot System 2.0/2.3, 2.8
Grid Plates
Versatile indications and proven application
TriLock Plates, Straight, T and T Extended 2.0/2.3/2.8
Fore- and Midfoot System 2.0/2.3, 2.8
TriLock Distal Radius Plates ADAPTIVE II 2.5, Volar
Distal Radius and Ulna System 2.5
ADAPTIVE II Plates
Support of the lunate facet and the DRUJ
TriLock Distal Radius Plates FPL 2.5, Volar
Distal Radius and Ulna System 2.5
FPL Plates
Support of the lunate facet, the DRUJ and the radial styloid
TriLock Distal Radius Fracture Plates 2.5, Volar
Distal Radius and Ulna System 2.5
Fracture Plates
Support of extension fractures with involvement of the radial styloid
TriLock Distal Radius Fracture Plate minimally invasive 2.5, Volar*
Distal Radius and Ulna System 2.5
Extrarticular Fracture Plates
TriLock Distal Radius Volar Frame Plates 2.5, Volar
Distal Radius and Ulna System 2.5
Volar Frame Plates
Compact plate design for short incisions
TriLock Distal Radius Correction Plates 2.5, Volar
Distal Radius and Ulna System 2.5
Correction Plates
Correction of incongruencies both in length and angle
TriLock Calcaneus Plates 3.5
Calcaneus System 3.5
Multidirectional and angular stable treatment for calcaneus fractures and osteotomies
SPEEDTIP C (C-SNAP) Screw 2.0 / 2.8
SpeedTip C 2.0, 2.8
The next generation of self-drilling and self-tapping compression screws
Hook Plates 1.5
Distal Radius and Ulna System 2.5
Hook Plates
For treatment of small, very distal fracture fragments and bony ligament avulsions
TriLock Distal Radius Small Fragment Plates 2.5
Distal Radius and Ulna System 2.5
For fracture-specific fixation of isolated simple to complex intra-articular distal radius fractures
TriLock Lunate Facet Plates 2.5, Volar
Distal Radius and Ulna System 2.5
Lunate Facet Plates
Treatment of isolated, volar rim fragments
TriLock Distal Radius Plates XL 2.5, Volar
Distal Radius and Ulna System 2.5
XL Plates
Fixation of combined diaphyseal-metaphyseal radius fractures as well as correction osteotomies
TriLock Distal Radius Rim Plates 2.5, Volar
Distal Radius and Ulna System 2.5
Rim Plates
Treatment of complex, intra-articular fractures with volar rim fragments
TriLock Distal Radius Frame Plates 2.5, dorsal
Distal Radius and Ulna System 2.5
Dorsal Frame Plates
Fixation of complex fractures of the distal radius
Wrist Spanning Plates 2.5
Distal Radius and Ulna System 2.5
Spanning Plates
For complex, highly comminuted distal radius fractures
TRILOCK DISTAL ULNA PLATES 2.5
Distal Radius and Ulna System 2.5
Distal Ulna Plates
Treatment of complex head fractures
TriLock Distal Ulna Plates Y 2.5
Distal Radius and Ulna System 2.5
Distal Ulna Plates
Fixation of intra- and extra-articular fractures of the head and neck of the distal ulna
TriLock Ulna Shortening Plate 2.5
Ulna Shortening System 2.5
Osteotomies with angular stable plating and guided, rotation-proof compression
TriLock Total Wrist Fusion Plates 2.5
Arthrodesis System 2.0 / 2.3, 2.5
Total Wrist Fusion Plates
Total wrist arthrodesis
TriLock Wrist Fusion Plates 2.5
Arthrodesis System 2.0 / 2.3, 2.5
Wrist Fusion Plates
Fusion without arthrodesis of the carpometacarpal joint
TriLock RSL Fusion Plates, volar and dorsal 2.5
Arthrodesis System 2.0 / 2.3, 2.5
RSL Fusion Plates
Radiocarpal arthrodesis from volar or dorsal
TriLock T-Plate, 5/4 Hole 1.2/1.5
Hand 1.2 - 2.3
For reconstruction of articular fracture fragments and fractures close to the joint in phalanges
TriLock Scaphoid Plates 1.2/1.5
Hand 1.2 - 2.3
For non-unions and multifragmentary fractures of the scaphoid
TriLock Four Corner Fusion Plates 2.0/ 2.3
Arthrodesis System 2.0 / 2.3, 2.5
Midcarpal arthrodesis through compression and angular stable locking
Compression Hook Plate 1.2/1.5
Hand 1.2 - 2.3
For treatment of bony ligament avulsions (mallet fractures)
TriLock Rotation Plate, 3/3-Hole 2.0/2.3, 1.2/1.5
Hand 1.2 - 2.3
For correction of rotationally malunited fractures and for exact reduction of acute fractures, in phalanges and in metacarplas
MC Compression Plate, 6 Hole, straight 2.0/2.3
Hand 1.2 - 2.3
For unstable transverse fractures, which are supported interfragmentarily after repositioning and fixation
TriLock Radial Head Plates 2.0
APTUS Radial Head
Stable fixation designed to address soft tissue concerns for complex elbow fractures using anatomic, angular stable plates
TriLock Coronoid Plate 2.0
APTUS Ulna
Stable fixation for coronoid fractures
Anatomical fit and angular stable
TriLock Olecranon Tension Plate 2.8
APTUS Ulna
Stable fixation designed to address soft tissue concerns for complex elbow fractures using anatomic, angular stable plates
TriLock Olecranon Double Plates 2.8
APTUS Ulna
Stable fixation designed to address soft tissue concerns for complex elbow fractures using anatomic, angular stable plates
Distal Humerus Plates 2.8
APTUS Distal Humerus
Stable fixation designed to address soft tissue concerns for complex elbow fractures using anatomic, angular stable plates
MODUS® 0.9/1.2
Fixation of fractures, osteotomies and reconstructive procedures that require positional and functional stability
MODUS® 1.5
Fixation of fractures, osteotomies and reconstructive procedures that require positional and functional stability
MODUS® 1.5 SpeedTip
Self-drilling MODUS SpeedTip screws save time and effort whilst providing secure implant fixation. Intraoral surgery becomes considerably more efficient since without the pre-drilling the positioning of the plate and screw insertion can be performed in one working step.
MODUS® Orthognathics 1.5/2.0
LeFort I, II and III, Ramus and corpus osteotomies and genioplasties.
MODUS® IMF SpeedTip 2.0
Reduction and fixation of dislocated or fractured bone fragments and restoration of occlusion in orthognathic procedures
MODUS® TriLock 2.0/2.3/2.5
Severe and comminuted fractures of the mandible and midface region
MODUS® Trauma 2.5
Unstable fractures of the mandible
Multi-segment and comminuted fractures
Fractures with loss of bone substance
Dislocated fractures of the body of the mandible and angular fractures
ALL-IN-ONE STAPLE
All-in-One Staple
Implant and all implant-specific instruments included
Available in two widths and two angles with barbed legs